Submersible Solar Water Pump – Lincoln

NO BATTERY REQUIRED WITH THIS SYSTEM Manufactured & Assembled in North America With 64 watt Solar Module Our pumps are primarily designed to efficiently supply potable water to off-grid remote site dwellings and for other low volume intermittent duty applications. It consists of the following components: 1. (1) 64 watt solar module. 2. (1) 12 volt Submersible Solar Water Pump, or 24 volt model - please specify. 3. (1) Model PPT 12-24-7V Linear Current Booster not for use with battery. SPECIFICATIONS The complete submersible well pump measures 8.5" high X 3.5" in diameter, and weighs 4.5 lbs The case features the following industrial quality components: Case: Heavy gauge impact extruded 3 1/2" O.D. anodized aluminum case fits 4" or larger wells. Main Gasket: Natural seamless rubber. Wire Leads: 8" color-coded 12 AWG vinyl insulated standard copper. Wire Seals: EPDM rubber plugs integrally installed to above wire leads. Intake Filter: 20 mesh spring-loaded stainless steel Discharge Fitting: 1/2" male NPT FLOJET pumps used in the Submersibles feature industrial grade head/motor units with the following specifications: Motor: Low current draw permanent magnet, ball bearing drive, 2,000 hour brush life. Pump Head: Positive displacement, duplex diaphragm design tolerates passage of small foreign particles and can be run dry without damage. Field serviceable: Simple disassembly provides user access to rebuildable head and replaceable motor brushes. Performance: Typically 1 to 2 GPM depending on lift height (head) and operating voltage. Maximum head is conservatively rated at 220 feet Power Draw: Typically 75 to 100 watts at full load. ONLY $849.00+SHIPPING For more information, please visit our webpage: http://www.chinadepot.com/swp1.html Or contact Walt: Phone 401-725-8141 8am-5pm est. Mon-Fri. e-mail chinadepot@aol.com

• Neighborhood: Lincoln
•  
• Provided by